Understanding Your 高山 Vehicle’s TPMS Requirements
高山 vehicles – including BAIC, GWM, Geely, and Geometry models – commonly use 433MHz TPMS sensors. The BL-ST-073 sensor from BH-Sens (Baolong Technology) is a direct-fit replacement for many 高山-compatible applications. Before ordering, check your current sensor’s OE number. Common numbers for this series include 01732445, 25M01A031A, and 3641100XKR02A. If you see one of these, the BL-ST-073 will match without programming.
Key Factors to Check Before Ordering
Frequency Compatibility
Most 高山 and related Chinese-brand vehicles operate on 433MHz. A 315MHz sensor will not work. Verify this on your original sensor or in your owner’s manual.
Sensor Type: Clamp-in vs. Snap-in
The BL-ST-073 is a clamp-in sensor with a metal valve stem. This design is more durable than snap-in sensors, which use rubber stems that can dry out. For B2B buyers stocking for 高山 fleets, clamp-in sensors reduce return rates from valve failure.
Pre-programmed vs. Programmable
Pre-programmed sensors like the BL-ST-073 come ready to install – no extra programming tool required. This saves time for DIY owners and reduces labor costs for shops buying in bulk.
Fitment Compatibility Table
| Brand | Compatible Models | OE Numbers Cross-Referenced |
|---|---|---|
| BAIC | EU5, EU7, X3, X5 | 01732445, 25M01A031A |
| BAIC EV | EC3, EC5, EX360 | 3641100XKR02A |
| GWM | Haval H6, Jolion | B00011299 |
| Geely | Emgrand, Binrui | 3666200U3400 |
| Geometry | A, C, EX3 | 3641101XKN01A |
Note: This is not a full list. Always confirm fitment with your VIN and the sensor’s published compatibility chart.
B2B Bulk Buying Notes for 高山 Dealers
When ordering TPMS sensors for a 高山 fleet or workshop inventory, consider these points:
- Consistency matters: Stick with one brand (BH-Sens) to simplify stock management and training. The BL-ST-073 covers multiple 高山-compatible brands under one SKU.
- Pre-programmed saves labor: Bulk buying pre-programmed sensors eliminates the need for a $200+ programming tool per kit. Your technicians can install and drive.
- Minimum order quantities: Most suppliers require 50–100 pieces minimum for bulk pricing. The BL-ST-073 is a fast-moving SKU for BAIC and GWM vehicles, so overstock risk is low.
- OE number verification: Request a fitment spreadsheet from your supplier. Cross-check against your customer vehicles’ current sensors – some 2019–2021 models may use different OE numbers than listed.
Recommended Part
For a reliable, direct-fit TPMS sensor that works with most 高山 vehicles (including BAIC, GWM, Geely, and Geometry), choose the BL-ST-073 from BH-Sens. It’s pre-programmed, clamp-in, and covers nine compatible brands under one part number.
FAQ
Can I use the BL-ST-073 sensor on a 高山 vehicle that originally had a different brand sensor?
Yes, as long as the frequency matches (433MHz) and the OE number on your original sensor is one of the cross-referenced numbers. The BL-ST-073 is a universal replacement designed to work with multiple Chinese-brand TPMS systems.
Do I need to reset or reprogram the sensor after installation on a 高山?
No, the BL-ST-073 is pre-programmed and self-learns. Most 高山 vehicles will recognize it after driving 5–10 minutes at speeds above 15 mph. If the light stays on, a simple relearn procedure (usually a magnet or scan tool) may be required per your vehicle manual.
What is the typical lifespan of a clamp-in TPMS sensor like the BL-ST-073?
Expect 5–7 years or 50,000–70,000 miles, whichever comes first. The lithium battery is sealed and not replaceable. If you see low battery warnings or the TPMS light flickers, replace the sensor immediately.
How do I verify that the BL-ST-073 fits my specific 高山 model year?
Locate the OE part number on your existing sensor (usually stamped on the metal housing). Match it against the list in the fitment table above. For models not listed, contact the supplier with your VIN – they can confirm compatibility.