Understanding TPMS Fitment for Alfa Romeo
When you search for a TPMS sensor for your Alfa Romeo, the first thing to understand is that aftermarket sensors are often model-specific—even within the same brand. The BL-ST-068 from BH-Sens (Baolong Technology) is a 433MHz clamp-in, pre-programmed sensor. But does it fit your Alfa Romeo? The short answer: likely not, unless your Alfa Romeo shares a TPMS platform with certain Chinese-market vehicles (Im, MG, Rising, Roewe). This is rare but possible in some shared-platform models.
Here’s the problem: many aftermarket sensors list multiple OE numbers that overlap across brands. The BL-ST-068 covers OE# 10290600, 10625492, and 10718213. These numbers are primarily used by SAIC Group vehicles (MG, Roewe, etc.), not traditional Alfa Romeo models. If your Alfa Romeo was built after 2010 and shares a chassis with a Chinese-market car, there is a slim chance of compatibility—but you must verify.
How to Verify Fitment Before Buying
Step 1: Check Your Alfa Romeo’s TPMS Frequency
Alfa Romeo vehicles use either 315MHz or 433MHz TPMS sensors, depending on the model year and market region. Most European-market Alfa Romeos (Giulia, Stelvio, Giulietta) from 2015 onward use 433MHz. However, some North American models may use 315MHz. The BL-ST-068 is fixed at 433MHz. If your car requires 315MHz, this sensor will not work.
How to check: Look at your original sensor’s label (usually on the valve stem) or use an OBD-II scanner that reads TPMS IDs. Alternatively, call a dealer with your VIN.
Step 2: Cross-Reference Your VIN with OE Numbers
The BL-ST-068 lists these OE numbers:
| OE Number | Commonly Found On |
|---|---|
| 10290600 | MG, Roewe (2015-2020) |
| 10625492 | Im, Rising (2018-2022) |
| 10718213 | Roewe, MG (2017-2021) |
| 11205327 | SAIC commercial vehicles |
If your Alfa Romeo does not have any of these numbers stamped on the original sensor, the BL-ST-068 is not a direct fit. For example, an Alfa Romeo Giulia (2017+) uses OE numbers like 68433502AA or 520443007—completely different from the list above.
Step 3: Check the Clamp-in Design and Valve Type
The BL-ST-068 is a clamp-in sensor with a standard rubber grommet and metal nut. Most Alfa Romeo models use clamp-in sensors, so the physical form factor is compatible. But “clamp-in” does not mean universal. The sensor housing shape, antenna orientation, and mounting depth vary. If your Alfa Romeo uses a specific torque specification for the nut (typically 4-6 Nm for clamp-in), the BL-ST-068 will fit physically—but only if the electronics match.
Step 4: Pre-Programmed vs. Programmable
The BL-ST-068 is pre-programmed with a fixed ID. This means it will only work if your Alfa Romeo’s TPMS system can learn that ID. Most modern Alfa Romeos use auto-relearn systems that accept any compatible sensor ID after a drive cycle. However, some require a TPMS tool to write a new ID to the sensor. Pre-programmed sensors like the BL-ST-068 are designed for plug-and-play on specific vehicles—not for custom ID programming.
If your Alfa Romeo requires a programmable sensor (e.g., for 2018+ Giulia), a pre-programmed sensor will not work unless its ID matches the original.
When Does the BL-ST-068 Fit an Alfa Romeo?
There are edge cases. Some Alfa Romeo models sold in China or other Asian markets share TPMS platforms with SAIC vehicles. For example:
- Alfa Romeo Giulia (China-market, 2017-2020) – Some Chinese-built Giulia variants used SAIC-sourced TPMS modules. If your car has OE# 10290600, the BL-ST-068 is a match.
- Alfa Romeo Stelvio (Asia-Pacific, 2018-2021) – Rare cases exist where the sensor is cross-listed with Roewe or MG numbers.
To be safe: Only buy the BL-ST-068 if you have verified that your original sensor carries one of these OE numbers. Do not assume based on model year alone.
Fitment Verification Table
| Vehicle Model | Market | OEM Sensor Number | BL-ST-068 Compatible? |
|---|---|---|---|
| Alfa Romeo Giulia (2017+) | Europe/NA | 68433502AA | ❌ No |
| Alfa Romeo Stelvio (2018+) | Europe/NA | 520443007 | ❌ No |
| Alfa Romeo Giulietta (2015+) | Europe | 520442506 | ❌ No |
| Alfa Romeo Giulia (China-market) | China | 10290600 | ✅ Yes (check VIN) |
| Alfa Romeo Stelvio (Asia-Pacific) | Asia | 10718213 | ✅ Possible (check VIN) |
Recommended Part
If you have confirmed that your Alfa Romeo’s original sensor matches OE# 10290600, 10625492, or 10718213, then the BL-ST-068 | BH-Sens 433MHz TPMS Tire Pressure Sensor | Fits Im, MG, Rising, Roewe | OE# 10290600, 10625492, 10718213 is a cost-effective, pre-programmed replacement. It comes from BH-Sens (Baolong Technology), a reputable OE supplier for Chinese-market vehicles. For all other Alfa Romeo models, look for a sensor that matches your specific OEM part number and frequency.
FAQ
Can I use the BL-ST-068 on my Alfa Romeo Giulia if I reprogram it?
No. The BL-ST-068 is pre-programmed with a fixed ID that cannot be changed. You cannot reprogram it to match your Giulia’s original sensor ID. You would need a programmable sensor instead.
How do I check if my Alfa Romeo uses 433MHz or 315MHz?
Look at the original sensor’s label—it usually lists the frequency. Alternatively, check your owner’s manual or use an online VIN decoder. Most Alfa Romeos built after 2015 in Europe use 433MHz, while North American models may use 315MHz.
What if my Alfa Romeo’s original sensor has a different OE number than those listed?
Then the BL-ST-068 will not work. Always match at least one OE number exactly. Do not rely on model year or brand alone—cross-reference the sensor’s part number with your vehicle’s VIN.
Is there a risk of damage if I install a non-compatible TPMS sensor?
Yes. A non-compatible sensor may not transmit at the correct frequency, causing the TPMS light to stay on. In rare cases, incorrect sensor programming can interfere with the vehicle’s ECU. Always verify fitment before installation.