Which Hongqi Models Use This Sensor?
Hongqi uses a family of 433MHz TPMS sensors across its newer sedan and SUV lineup. The BH-Sens BL-ST-040 covers the most common Hongqi OE numbers, so if your Hongqi was built in the last decade, there’s a good chance this is the right replacement. Models that typically use this sensor include the H5, HS5, HS7, and H9, but the exact part number depends on the production date and trim level.
Don’t rely on the model name alone. Hongqi has changed sensor suppliers and part numbers over the years, so the only safe way to confirm fitment is to read the OE number stamped on your current sensor body.
Fitment Table
This table lists common Hongqi model fitments for the BL-ST-040. It is not exhaustive, but it covers the most frequent applications.
| Hongqi Model | Body Style | Typical OE Numbers on Original Sensor |
|---|---|---|
| H5 | Sedan | 3602100FD, 3602100FDA |
| HS5 | SUV | 3778080DB01A, 3778080DDS1 |
| HS7 | SUV | 3778080E16 |
| H9 | Sedan | 3602100FDA, 3778080DB01A |
Other FAW and Bestune models (such as Bestune T77 or B70) may use the same sensor, but always check the OE number rather than the model badge.
How to Verify Fitment Before Buying
First, remove the wheel so you can see the TPMS sensor on the valve stem. The OE number is usually laser-etched on the metal body or printed on a small label. Write it down before ordering.
Then compare your number with this list: 3602100FD, 3602100FDA, 3778080DB01A, 3778080DDS1, 3778080E16. If you see an exact match, the sensor will work as a direct replacement.
Also confirm two physical specs:
- Frequency – must be 433MHz (not 315MHz). This sensor is 433MHz only.
- Valve type – must be clamp-in (metal valve screwed from the outside). This sensor is clamp-in.
If you’re still unsure, call the shop with your VIN or take a photo of the original sensor. A quick photo is usually enough to confirm compatibility.
If your sensor matches one of the OE numbers above, the BL-ST-040 | BH-Sens 433MHz TPMS Tire Pressure Sensor | Fits Bestune, FAW, Hongqi | OE# 3602100FD, 3602100FDA, 3778080DB01A is a direct replacement — no programming needed.
Recommended Part
For most Hongqi owners, the BH-Sens BL-ST-040 is the cleanest option because it is pre-programmed and covers the most common Hongqi OE numbers. You install it, have the vehicle relearn the sensor ID, and you’re done. Order the BL-ST-040 | BH-Sens 433MHz TPMS Tire Pressure Sensor | Fits Bestune, FAW, Hongqi | OE# 3602100FD, 3602100FDA, 3778080DB01A after confirming your original sensor’s part number.
FAQ
Do I need to program the BL-ST-040 sensor before installing it?
No. It arrives pre-programmed. After installation, you still need to perform the TPMS relearn procedure on your Hongqi (using the dashboard menu or a TPMS tool), but you don’t have to write any sensor ID beforehand.
What if my Hongqi’s sensor has a part number not on the list?
Then this sensor is not guaranteed to fit. Send a photo of the sensor body or the original part number to the seller before ordering. Using the wrong sensor can cause TPMS warning light issues or no signal at all.
How do I find the OE number on my original sensor?
You need to get the wheel off the ground and read the sensor around the valve stem. It is a small metal or plastic unit mounted to the wheel. The OE number is usually visible without dismounting the tire—just clean the area with a rag.
Will this sensor work if I have aftermarket wheels?
Yes, as long as the wheels have a standard TPMS hole and the clamp-in valve fits. Aftermarket wheels sometimes use different valve stem angles, so check for clearance inside the wheel. If you have low-profile tires, it’s still fine as long as the valve hole is the standard 11.3mm size.