Understanding TPMS Compatibility for Your Verano
When replacing TPMS sensors on a VERANO, the most common mistake is assuming any 433MHz sensor will work. Verano models built for North American markets (2012–2017) exclusively use 315MHz sensors with specific protocols. The BL-ST-062 sensor operates at 433MHz and is intended for Asian and European vehicle platforms like BYD, Toyota, and certain Chinese-market models.
If you own a Verano, do not purchase the BL-ST-062 unless you have verified aftermarket modifications or are working with a compatible Chinese-market variant (rare in North America).
Verano TPMS Specifications by Generation
| Model Year | Frequency | Sensor Type | Common OE Numbers |
|---|---|---|---|
| 2012–2017 | 315MHz | Clamp-in | 13598773, 13581560, 22853741 |
| 2018–2021 (China market) | 433MHz | Clamp-in | 4260703011 (verify) |
Note: North American Veranos ceased production after 2017. Chinese-market Verano Pro models (2020+) may use 433MHz sensors.
How to Verify Fitment Before Buying
Follow this checklist to avoid returns and installation headaches:
- Check your current sensor frequency – Remove one tire, locate the sensor, and look for a stamped frequency (315MHz or 433MHz). If unreadable, use a TPMS tool (like Autel or Bartec) to read the sensor ID and frequency.
- Match the OE number – The BL-ST-062 cross-references to OE# 4260703011, SA3HE3609200B, and SFH3609200B. Compare these to the numbers on your existing sensor. If none match, the sensor is incompatible.
- Verify protocol compatibility – Even if frequency matches, some Veranos use specific protocols (e.g., Schrader, Continental). Pre-programmed sensors like the BL-ST-062 are cloned to specific OE protocols. For a Verano, you need either a pre-programmed 315MHz sensor or a programmable sensor that can be cloned from your old one.
- Use an online fitment tool – Enter your VIN into a reputable aftermarket parts site. This will show exact sensor part numbers and frequencies for your specific year and trim.
Recommended Part for Verano Owners
For North American Verano owners, look for 315MHz clamp-in TPMS sensors from brands like Schrader, Denso, or ACDelco. If you are working with a Chinese-market Verano Pro that uses 433MHz sensors, the BL-ST-062 | BH-Sens 433MHz TPMS Tire Pressure Sensor | Fits BYD, Denza, Fangchengbao, Toyota, Young | OE# 4260703011, SA3HE3609200B, SFH3609200B may fit, but always confirm the OE number and protocol first.
FAQ
Does the BL-ST-062 sensor work on any Buick Verano?
No. The BL-ST-062 operates at 433MHz and is designed for Asian/European platforms. North American Veranos (2012–2017) use 315MHz sensors. Only Chinese-market Verano Pro models (2020+) might be compatible, and you must verify the OE number matches 4260703011 or one of its cross-references.
How do I know if my Verano uses 315MHz or 433MHz TPMS?
Check the sensor body through the tire valve stem opening. The frequency is usually stamped on the metal or plastic housing. Alternatively, use a TPMS diagnostic tool to read the sensor frequency directly. Your original equipment sensor will clearly indicate its operating frequency.
Can I reprogram the BL-ST-062 to work on a Verano?
No. The BL-ST-062 is pre-programmed with a fixed protocol and frequency (433MHz). It cannot be reprogrammed to 315MHz. If your Verano requires 315MHz, you need a different sensor that matches your vehicle’s native frequency and protocol.
What happens if I install the wrong TPMS sensor on my Verano?
The sensor will not communicate with your vehicle’s TPMS receiver. The tire pressure warning light will remain on, and you will get no pressure readings. In some cases, the sensor may physically fit the tire valve hole but will be electronically invisible to the car.