Quick AnswerThe RCZ (Peugeot RCZ) uses the same TPMS sensor system as many Peugeot, Citroën, and DS models from the early 2010s. The BL-ST-079 BH-Sens…
Quick AnswerWhen installing a BH-Sens 433MHz TPMS sensor (BL-ST-048) on an ENVISION S, use a clamp-in sensor with a torque spec of 35–45 in-lbs (4–5…
Quick AnswerWhen swapping to winter tires on your Forthing, the TPMS sensors must be correctly transferred or replaced with compatible units like the BH-Sens 433MHz…
Quick AnswerTo choose the right TPMS sensor for your 炮, verify the sensor frequency (433MHz is common for BAIC, GWM, and Geely platforms), confirm the…
Quick AnswerThe most common causes of a TPMS warning light on an XTS are a dead sensor battery (sensors typically fail after 5–7 years), a…
Quick AnswerThe BH-Sens BL-ST-051 is a 433MHz TPMS sensor designed specifically for Nio and Onvo vehicles, replacing OE numbers P0242518, P0302230, and P0385734. It uses…
Quick AnswerInstalling a TPMS sensor on your Haval requires precise torque (typically 30-40 in-lbs for clamp-in sensors), proper valve stem service with new gaskets, and…
Quick AnswerBH-Sens BL-ST-021 (433MHz) TPMS sensors are pre-programmed and directly compatible with select EZS, MG, Rising, and Roewe models from 2015 onward. To verify fitment…
Quick AnswerThe BH-Sens RDE036V21 433MHz TPMS sensor fits select S models, plus Alfa Romeo, Aston Martin, BAIC, Chrysler, Dodge, and 8 other brands, covering model…
Quick AnswerGHOST vehicles require 4–6 Nm (35–53 in-lbs) torque on clamp-in TPMS sensors to avoid housing cracks or seal leaks. Always replace the valve stem…
