Quick AnswerFor EADO PLUS, the BH-Sens BL-ST-042 is a 433MHz clamp-in, pre-programmed TPMS sensor that should be verified against OE references 3601010BK01, 3601010MK01, or 3601010MK51…
Quick AnswerThe BH-Sens BL-ST-042 433MHz TPMS sensor (OE# 3601010BK01/3601010MK01/3601010MK51) directly replaces the factory tire pressure sensors on Changan EADO ET models from approximately 2015 to…
Quick AnswerThe BH-Sens BL-ST-042 TPMS sensor operates at 433MHz frequency, uses a sealed lithium battery rated for 5-7 years typical life, carries an IP67 dust/water…
Quick AnswerFor COS PRO vehicles (and compatible Changan, Kaicene, Oshan models), the correct TPMS sensor is typically a 433MHz clamp-in unit pre-programmed to match OE…
Quick AnswerThe EADO ET requires a TPMS relearn procedure after sensor replacement or tire rotation. You can use either the automatic relearn method (drive above…
Quick AnswerHycan vehicles use 433MHz TPMS sensors compatible with the Changan/Kaicene/Oshan system, including the BH-Sens BL-ST-042 sensor (OE# 3601010BK01, 3601010MK01, 3601010MK51). To verify fitment before…
Quick AnswerInstalling a TPMS sensor on an EADO XT requires a precise torque of 4.0–6.0 Nm (35–53 in-lbs) on the valve stem nut, a new…
Quick AnswerTPMS relearn on a CANYON vehicle is required after sensor replacement or tire rotation. There are three methods: auto relearn (drive to sync), OBD…
Quick AnswerThe correct TPMS sensor for your EADO XT must match the vehicle’s frequency (433MHz for most models), be pre-programmed to avoid costly relearn processes,…
Quick AnswerThe EADO EV uses a 433MHz TPMS system that requires a relearn procedure after sensor replacement or tire rotation. You can perform an auto…
