Why Fitment Verification Matters for KADJAR TPMS Sensors
KADJAR is a Chinese brand that builds SUVs and crossovers, often sharing platforms with Renault, Nissan, and Dongfeng. Because of this shared architecture, the TPMS system on many KADJAR models uses the same 433MHz sensors found on certain Renault, Mitsubishi, and Infiniti vehicles. However, KADJAR has also used different TPMS generations across model years and trim levels.
Installing the wrong sensor means your TPMS light stays on, the sensor won’t pair, or you get false pressure readings. The BL-ST-066 | BH-Sens 433MHz TPMS Tire Pressure Sensor | Fits Fengon, Ineos, Infiniti, Mitsubishi, Nammi & 4 More | OE# 3641050RD01, 407002GL0A, 407002GN0A is a clamp-in sensor that matches OE# 3641050RD01, 407002GL0A, and 407002GN0A — numbers commonly seen on Renault-based TPMS systems. But you must still confirm your specific KADJAR uses one of these.
KADJAR Model Years That Likely Use This Sensor
Based on common platform sharing, the KADJAR models built between approximately 2016 and 2023 that are based on the Renault-Nissan CMF platform are the most likely candidates. This includes:
- KADJAR (first generation, 2016-2023) — especially models with 1.5L turbo or 1.6L engines
- KADJAR E3 / KADJAR i — some electric variants use similar TPMS
However, never rely on year alone. Some 2020+ KADJAR models switched to a different protocol or frequency.
How to Verify Fitment Before Buying (Step-by-Step)
Step 1: Check Your Current Sensor
Remove one wheel and look at the TPMS sensor mounted inside the tire (clamp-in, metal stem). Find the part number printed on the sensor body. Common OE numbers for KADJAR include:
| OE Part Number | Frequency | Typical Platform |
|---|---|---|
| 3641050RD01 | 433MHz | Renault/Nissan |
| 407002GL0A | 433MHz | Renault/Mitsubishi |
| 407002GN0A | 433MHz | Renault/Nissan |
| 407002GX0A | 433MHz | Nissan |
| 407005663R | 433MHz | Renault/Dacia |
If your sensor has one of these numbers, the BL-ST-066 | BH-Sens 433MHz TPMS Tire Pressure Sensor | Fits Fengon, Ineos, Infiniti, Mitsubishi, Nammi & 4 More | OE# 3641050RD01, 407002GL0A, 407002GN0A is a direct match.
Step 2: Confirm Frequency
Most KADJAR TPMS systems operate at 433MHz, but some newer models (2021+) may use 315MHz or 433MHz. Check your owner’s manual or use a TPMS scan tool to read the sensor frequency. The BL-ST-066 only works with 433MHz systems.
Step 3: Check Your Vehicle’s VIN
Contact the supplier or use an online VIN decoder that shows TPMS details. Many KADJAR models built for export to Europe or the Middle East use the same sensor as the Renault Koleos or Nissan Qashqai.
Recommended Part for Verified Fitment
If your KADJAR matches the OE numbers listed above and uses 433MHz, the BL-ST-066 | BH-Sens 433MHz TPMS Tire Pressure Sensor | Fits Fengon, Ineos, Infiniti, Mitsubishi, Nammi & 4 More | OE# 3641050RD01, 407002GL0A, 407002GN0A is a reliable direct replacement. It is a clamp-in sensor from BH-Sens (Baolong Technology), which is an OEM supplier for many Renault-Nissan group vehicles.
FAQ
Does the BL-ST-066 fit all KADJAR models?
No. It fits KADJAR models that use 433MHz TPMS with OE numbers 3641050RD01, 407002GL0A, 407002GN0A, or their cross-references. Models using different frequencies or OE numbers (e.g., 407003VU0A on some 2023+ cars) may not be compatible. Always verify by checking your existing sensor.
Can I install this sensor myself, or do I need a tire shop?
You can install the sensor if you have a tire dismounting machine, a torque wrench (sensor nut torque is typically 4-5 Nm), and a TPMS programming tool to pair the sensor to your vehicle. Most owners prefer a tire shop to avoid damaging the sensor during installation.
How do I program the BL-ST-066 to my KADJAR?
This sensor is a direct OE replacement. It will auto-learn or can be programmed using a standard TPMS tool (like Autel or Bartec) by entering the OE number. Some KADJAR models require a relearn procedure after tire rotation or sensor replacement — check your manual.
What if my KADJAR uses a different OE number?
If your sensor part number is not listed in the table above, the BL-ST-066 is likely not a match. You can search for a sensor that matches your exact OE number, or contact us with your VIN for a recommendation.