Quick AnswerOn a QASHQAI, a TPMS light that comes on steady usually means low pressure or a cold-weather pressure drop — check and inflate all…
Quick AnswerCheck the frequency stamped on your original sensor (usually 433MHz on Amarok), confirm it’s a clamp-in fitment, and choose between pre-programmed or programmable depending…
Quick AnswerThe BH-Sens BL-ST-039 is a pre-programmed 433MHz clamp-in TPMS sensor that replaces OE numbers E300019160, E300020260, and H56A7920001AC, covering Aeolus, Eπ, Mhero, Nammi, and…
Quick AnswerTo pick the correct TPMS sensor for your KICKS, first check the sensor frequency (433 MHz is common for this model), the OE part number…
Quick AnswerThe BL-ST-063 BH-Sens 433MHz TPMS sensor is a direct OE replacement for many Mhero models (2021–2025) as well as Aeolus, Eπ, Nammi, and Voyah…
Quick AnswerAeolus vehicles require a TPMS relearn after sensor replacement or tire rotation. You can use auto relearn (drive the car), OBD relearn (with a…
Quick AnswerInstalling TPMS sensors on Eπ vehicles requires careful attention to torque specs (typically 4-6 Nm for clamp-in sensors), proper valve stem service to prevent…
Quick AnswerThe TPMS warning light on a Mitsubishi typically means one sensor has a dead battery (lifespan 5-7 years), a signal blockage from aftermarket wheels…
Quick AnswerThe BH-Sens BL-ST-063 is a pre-programmed 433MHz TPMS sensor designed specifically for select Chinese-market vehicle brands under the FREE umbrella—including Aeolus, Eπ, Mhero, Nammi,…
Quick AnswerWhen swapping to winter tires on your KICKS, the BH-Sens BL-ST-063 433MHz TPMS sensor (OE# E300019160/E300020260) is a direct clamp-in replacement that requires no…
