Why TPMS Fitment Matters for SHINE MAX Owners
SHINE MAX vehicles—sold under brands like Aeolus, Voyah, and Mhero—share common TPMS platforms, but not all sensors are interchangeable. Installing the wrong frequency or sensor type can trigger warning lights, fail to register tire pressure, or damage the receiver module. The BL-ST-039 sensor is designed specifically for 433MHz systems used in these brands, but you still need to confirm it matches your exact vehicle.
SHINE MAX TPMS Compatibility by Brand
Below is a fitment table for the BL-ST-039 sensor. Use it as a starting point, then verify with your VIN or existing sensor.
| SHINE MAX Brand | Compatible Models | Approximate Year Range | TPMS Frequency | Sensor Type |
|---|---|---|---|---|
| Aeolus | AX7, Yixuan, Shine Max (sedan) | 2020–2025 | 433MHz | Clamp-in |
| Eπ | Eπ 007, Eπ 008 | 2022–2025 | 433MHz | Clamp-in |
| Mhero | Mhero 917 | 2023–2025 | 433MHz | Clamp-in |
| Nammi | Nammi 01 | 2023–2025 | 433MHz | Clamp-in |
| Voyah | Free, Dreamer, Passion | 2021–2025 | 433MHz | Clamp-in |
Important: Some older SHINE MAX models (pre-2020) may use 315MHz sensors or different valve designs. Always check before ordering.
How to Verify Fitment Before Buying
Step 1: Locate the OE Number on Your Current Sensor
Remove the tire (or access the valve stem from the wheel well). The sensor’s OE number is printed on the metal body. Common OE numbers for 433MHz SHINE MAX sensors include:
- E300019160
- E300020260
- H56A7920001AC
If you see one of these, the BL-ST-039 | BH-Sens 433MHz TPMS Tire Pressure Sensor | Fits Aeolus, Eπ, Mhero, Nammi, Voyah | OE# E300019160, E300020260, H56A7920001AC is a direct replacement.
Step 2: Check Your Vehicle’s Build Date
SHINE MAX changed TPMS suppliers around 2020. Vehicles built before January 2020 might use a different frequency. Look at the driver’s door jamb sticker for the build month/year.
Step 3: Verify Valve Type
The BL-ST-039 is a clamp-in sensor. If your vehicle has a screw-in (snap-in) sensor, this part won’t fit. Clamp-in sensors are secured with a nut on the valve stem; snap-in sensors push into the wheel hole.
Step 4: Use a TPMS Tool for Confirmation
If you have a TPMS scan tool (like Autel or Bartec), place it near the sensor and read the frequency. It should display “433MHz” if compatible. This is the most reliable method.
Common Fitment Mistakes to Avoid
- Mixing frequencies: A 433MHz sensor will not pair with a 315MHz receiver. Your TPMS light will stay on.
- Ignoring pre-programming: The BL-ST-039 is pre-programmed to work with SHINE MAX vehicles. Do not attempt to clone or copy programming unless you have the correct tool.
- Assuming all SHINE MAX models are identical: Voyah Free uses the same sensor as Aeolus AX7, but the Mhero 917 has a different valve stem length. Verify the sensor’s physical fit.
Recommended Part
For SHINE MAX owners needing a reliable 433MHz TPMS replacement, the BL-ST-039 | BH-Sens 433MHz TPMS Tire Pressure Sensor | Fits Aeolus, Eπ, Mhero, Nammi, Voyah | OE# E300019160, E300020260, H56A7920001AC is a proven choice. It covers Aeolus, Eπ, Mhero, Nammi, and Voyah models from 2020 onward. Always confirm your OE number before ordering.
FAQ
Can I use the BL-ST-039 on a 2019 SHINE MAX model?
Not recommended. Most 2019 SHINE MAX vehicles use 315MHz sensors. Check your existing sensor’s OE number or frequency with a TPMS tool before purchasing.
How do I know if my SHINE MAX uses clamp-in or snap-in sensors?
Remove the valve stem cap. If you see a metal nut around the valve stem base, it’s clamp-in. If the valve stem has a rubber grommet and no nut, it’s snap-in. The BL-ST-039 is only for clamp-in designs.
Will the BL-ST-039 work on a Dongfeng-branded vehicle?
The BL-ST-039 is designed for SHINE MAX brands (Aeolus, Eπ, Mhero, Nammi, Voyah). Dongfeng models outside this group may use different sensors. Check your OE number.
Do I need to reprogram the sensor after installation?
No. The BL-ST-039 is pre-programmed and will auto-pair with your vehicle’s TPMS system after a short drive (typically 10–15 minutes at speeds above 20 mph). No extra tools are required.