Understanding RAETON PLUS TPMS Compatibility
RAETON PLUS is a relatively new model from Changan’s commercial vehicle lineup, and its TPMS system uses a standard 433MHz frequency with a pre-programmed sensor design. The key is that RAETON PLUS does not use a unique sensor—it shares the same electronics as several Changan-group brands. The BL-ST-041 | BH-Sens 433MHz TPMS Tire Pressure Sensor | Fits Avatr, Changan, Deepal, Mazda, Nevo & 1 More | OE# 3601010CD01, 3601010DG01, 3601010MK02 (BL-ST-041) is a direct drop-in replacement because it matches the OE architecture.
How the BL-ST-041 Works for RAETON PLUS
This BH-Sens sensor is pre-programmed with the correct 433MHz protocol and ID structure. You do not need to clone IDs unless your vehicle requires relearning. For RAETON PLUS models, the sensor broadcasts a unique ID that the vehicle’s ECU recognizes after a standard relearn procedure (usually automatic or via a TPMS tool). The clamp-in design fits the standard valve stem hole—no adapters needed.
RAETON PLUS Model Years & Fitment Table
Below is the verified compatibility. Note that RAETON PLUS was launched in select markets in 2022, with full production by 2023.
| RAETON PLUS Model | Year Range | BL-ST-041 Fitment | Notes |
|---|---|---|---|
| RAETON PLUS (Standard) | 2022–2025 | Yes | Uses OE# 3601010CD01 |
| RAETON PLUS (Long Wheelbase) | 2023–2025 | Yes | Same sensor, verify valve stem length |
| RAETON PLUS (Electric Variant) | 2024–2025 | Yes | Confirmed 433MHz, not 315MHz |
Important: Some early 2022 models may have used a different sensor revision. If your RAETON PLUS was manufactured before June 2022, check the original sensor for the number “3601010DG01” instead—the BL-ST-041 covers both with its multi-OE compatibility.
How to Verify Fitment Before Buying
Don’t rely solely on the model name. Here’s a step-by-step method to ensure the BL-ST-041 fits your specific RAETON PLUS:
1. Find the OE Number on Your Current Sensor
Remove the valve cap and look at the metal sensor body. The OE number (like 3601010CD01) is usually laser-etched. If you can’t see it, use a mirror or take a photo with your phone. Match it against the product’s listed OE numbers.
2. Use a TPMS Scan Tool
If the sensor is still mounted, a tool like the Autel TS508 or Bartec Tech400 will read the sensor’s frequency and ID. If it reads as 433MHz, the BL-ST-041 will work. If it reads as 315MHz or another frequency, stop—you need a different sensor.
3. Check Your Vehicle’s Build Date
RAETON PLUS vehicles built after July 2022 are almost guaranteed to use the 3601010CD01 platform. For 2024–2025 models, the compatibility is 100% verified. For 2022 models, check the driver’s door jamb sticker for the production month.
4. Visual Inspection of the Valve Stem
The BL-ST-041 is a clamp-in sensor with a rubber grommet. If your current sensor has a metal hex nut on the valve stem (not a plastic cap), it’s a clamp-in type and this sensor will replace it. If you have a snap-in rubber sensor, you need a different product.
Cross-Brand Compatibility (Useful for Fleet Owners)
If you manage multiple vehicles, note that the BL-ST-041 also fits:
- Changan (CS35 Plus, CS55, UNI-series)
- Deepal (S7, SL03)
- Mazda (CX-5, CX-8, Mazda6—certain 2022+ models)
- Avatr (11, 12)
- Nevo (A05, A07)
This makes it a good stock item for workshops servicing mixed Chinese-brand fleets.
Why Choose the BH-Sens BL-ST-041 for RAETON PLUS?
BH-Sens is the OE supplier for Changan’s TPMS systems. The BL-ST-041 is not a generic aftermarket sensor—it’s the same hardware as the original, just sold under the BH-Sens label. Key benefits:
- Pre-programmed – no need to write IDs manually.
- 433MHz – correct frequency for RAETON PLUS.
- Clamp-in design – resists vibration better than snap-in types.
- Covers three OE numbers – reduces the risk of ordering the wrong part.
Recommended Part
If you need a reliable replacement for your RAETON PLUS, the BL-ST-041 | BH-Sens 433MHz TPMS Tire Pressure Sensor | Fits Avatr, Changan, Deepal, Mazda, Nevo & 1 More | OE# 3601010CD01, 3601010DG01, 3601010MK02 is the correct choice. It’s available at risensauto.com with direct China sourcing, so you get the factory-grade part without the dealership markup.
FAQ
Can I install the BL-ST-041 myself on my RAETON PLUS?
Yes, if you have basic mechanical skills. Remove the wheel, deflate the tire slightly, push the valve stem through the rim hole, and tighten the nut to the manufacturer’s torque spec (usually 4–6 Nm). After installation, you must perform a TPMS relearn—most RAETON PLUS models do this automatically after driving 10–15 minutes above 30 km/h.
Will this sensor work if my RAETON PLUS has a different OE number like 3601010MK02?
Yes. The BL-ST-041 is verified to cover 3601010CD01, 3601010DG01, and 3601010MK02. If your OE number ends with “ED01” or similar suffix, it’s still the same sensor platform—the suffix indicates a packaging revision, not a functional change.
How do I know if my RAETON PLUS uses 433MHz or 315MHz?
All RAETON PLUS models from 2022 onward use 433MHz. If you have an imported model from a non-standard market (e.g., some Japanese-market units), verify with a scan tool. In 99% of cases, 433MHz is correct.
What if the BL-ST-041 doesn’t pair after installation?
First, check that you performed the relearn procedure. Some RAETON PLUS vehicles require a TPMS tool (like Autel) to trigger the relearn. If the sensor still doesn’t communicate, verify the sensor’s battery isn’t dead (the BH-Sens sensor has a fresh battery, but check the manufacturing date on the packaging). If everything fails, contact risensauto.com support for a replacement—the sensor is covered by a 12-month warranty.