Why TPMS Fitment Matters for Hycan Owners
Hycan is a relatively new joint venture between GAC Group and NIO, producing electric vehicles like the Hycan Z03, Hycan A06, and Hycan 007. While these cars share platforms with Changan and GAC models, their TPMS systems are not always interchangeable. Using the wrong sensor can cause warning lights, inaccurate pressure readings, or complete system failure. This guide focuses on the 433MHz BH-Sens sensors that fit Hycan models, specifically the BL-ST-042, and how to confirm compatibility before you buy.
Hycan Model Coverage for 433MHz TPMS Sensors
The BH-Sens BL-ST-042 (433MHz) is pre-programmed to work with Hycan vehicles that use the Changan-derived TPMS platform. Based on available data and aftermarket experience, here is the confirmed coverage:
| Hycan Model | Production Years | TPMS Frequency | Compatible Sensor |
|---|---|---|---|
| Hycan Z03 | 2022 – present | 433MHz | BL-ST-042 (OE# 3601010BK01, MK01, MK51) |
| Hycan A06 | 2023 – present | 433MHz | BL-ST-042 (OE# 3601010BK01, MK01, MK51) |
| Hycan 007 | 2020 – 2022 | 433MHz | BL-ST-042 (OE# 3601010BK01, MK01, MK51) |
Note: Some early 2020 Hycan 007 models may use a different frequency. Always verify by checking the existing sensor’s label or using a TPMS scan tool.
How to Verify Fitment Before Buying (Step-by-Step)
Step 1: Locate Your Existing Sensor’s OE Number
Remove the tire and find the sensor attached to the valve stem. The OE number is typically printed on the sensor body. For Hycan, common OE numbers include:
- 3601010BK01
- 3601010MK01
- 3601010MK51
If you see one of these numbers, the BL-ST-042 | BH-Sens 433MHz TPMS Tire Pressure Sensor | Fits Changan, Kaicene, Oshan | OE# 3601010BK01, 3601010MK01, 3601010MK51 is a direct replacement.
Step 2: Check the Frequency
Use a TPMS trigger tool or scan tool to read the sensor’s frequency. Hycan vehicles from 2022 onward almost always use 433MHz. If the tool reads 315MHz or another frequency, the BL-ST-042 will not work.
Step 3: Verify the Vehicle’s Production Date
Hycan models built after January 2022 typically use the 433MHz system. For 2020–2021 models, check the sensor label or consult the vehicle manual. You can also contact a Hycan dealer with your VIN to confirm the TPMS type.
Step 4: Cross-Reference with Your VIN
Use the VIN to look up the original equipment sensor. Many online parts catalogs (including risensauto.com) allow VIN lookup. Match the OE number from your search to the BL-ST-042’s OE numbers: 3601010BK01, 3601010MK01, or 3601010MK51.
The BL-ST-042 Sensor: What You Need to Know
The BH-Sens BL-ST-042 is a clamp-in, pre-programmed TPMS sensor designed for Changan, Kaicene, Oshan, and Hycan vehicles. It operates at 433MHz and comes with the following OE cross-references:
- 3601010BK01
- 3601010MK01
- 3601010MK51
Key features:
- Pre-programmed: No need for a separate programming tool—the sensor is ready to install and will auto-learn with the vehicle’s TPMS module (on most Hycan models from 2022 onward).
- Clamp-in design: Installs like a standard valve stem; compatible with most alloy and steel wheels.
- Dedicated OE fitments: Verified for 24+ vehicle models including Hycan Z03, A06, and 007.
Note: While the sensor is pre-programmed, some Hycan models may require a TPMS relearn procedure after installation. We’ll cover that in the next section.
TPMS Relearn Procedure for Hycan Vehicles
After installing a new sensor like the BL-ST-042, you may need to perform a relearn so the vehicle recognizes the new sensor IDs. Here’s the general process for Hycan models:
- Turn the ignition to ON (do not start the engine).
- Use a TPMS activation tool to trigger each sensor in the correct order: LF, RF, RR, LR (or follow the vehicle’s specific sequence).
- Wait for the horn to honk or the TPMS light to flash, indicating the sensor was learned.
- Repeat for all four tires, then turn the ignition off and back on.
If the vehicle does not respond, consult the owner’s manual or a professional mechanic. Some Hycan models may require a diagnostic tool for the relearn.
Common Fitment Mistakes to Avoid
- Assuming all Hycan models use the same frequency: Early 2020 Hycan 007 models may use 315MHz. Always verify.
- Using a sensor with the wrong OE number: The BL-ST-042 is specifically for OE# 3601010BK01, MK01, and MK51. Other OE numbers may not fit.
- Skipping the VIN check: A simple VIN lookup can save you from buying an incompatible sensor.
- Forgetting the relearn procedure: Even with a pre-programmed sensor, the vehicle must learn the new sensor ID.
Recommended Part for Hycan TPMS Replacement
If you’ve confirmed your Hycan uses 433MHz and the OE numbers match 3601010BK01, 3601010MK01, or 3601010MK51, the BL-ST-042 | BH-Sens 433MHz TPMS Tire Pressure Sensor | Fits Changan, Kaicene, Oshan | OE# 3601010BK01, 3601010MK01, 3601010MK51 is the correct choice. It’s a direct-fit, pre-programmed sensor that saves you the hassle of programming and ensures accurate pressure monitoring.
FAQ
Can I use a Changan TPMS sensor on my Hycan vehicle?
Yes, if the Hycan model is based on the Changan platform (like the Z03 and A06), the TPMS sensors are often interchangeable. However, you must verify the frequency (433MHz) and OE number match. The BL-ST-042 is designed for Changan, Kaicene, Oshan, and Hycan vehicles, making it a safe cross-platform choice.
How do I know if my Hycan uses 433MHz or 315MHz TPMS?
Check the label on your existing sensor—it will list the frequency. Alternatively, use a TPMS scan tool to read the sensor. If you cannot access the sensor, contact a Hycan dealer with your VIN. Most Hycan models from 2022 onward use 433MHz.
Do I need a programming tool for the BL-ST-042 sensor?
No, the BL-ST-042 is pre-programmed and ready to install. However, some Hycan models may require a TPMS relearn procedure to sync the sensor with the vehicle’s module. This can often be done with a simple activation tool or by driving the vehicle for a few minutes.
What if my Hycan’s TPMS light stays on after installing the new sensor?
First, check that the sensor is installed correctly and the tire pressure is set to the recommended level. If the light remains on, perform a TPMS relearn as described in this guide. If the issue persists, the sensor may be incompatible, or the vehicle’s TPMS module may need diagnostics by a professional.