OEM vs Aftermarket: The Real Difference
RAETON vehicles use TPMS sensors manufactured by Baolong Technology – the same company that produces BH-Sens. The OEM sensor (often branded with the RAETON or Changan logo) and the BH-Sens aftermarket version share the same internal electronics, frequency (433MHz), and valve stem design.
The difference? Packaging and price. OEM sensors go through dealer channels with a markup of 2-3x. The BH-Sens BL-ST-057 is the same hardware, sold directly through aftermarket supply chains.
When OEM Makes Sense
- Under factory warranty – Some dealers may void TPMS-related claims if non-OEM sensors are installed.
- Fleet/commercial vehicles – If you require dealer-level scan tool compatibility for record-keeping.
- Specific programming needs – Very rare for RAETON, but some early models require proprietary initialization that only dealer tools can do.
Why BH-Sens BL-ST-057 is the Smarter Buy
| Feature | OEM Baolong | BH-Sens BL-ST-057 |
|---|---|---|
| Manufacturer | Baolong | Baolong (same factory) |
| Frequency | 433MHz | 433MHz |
| OE Cross Reference | 3601010CD01, 3601010DG01, 3601010MK02 | Same OE numbers |
| Programming | Pre-programmed (dealer required for new) | Pre-programmed, plug-and-play |
| Typical Price (per sensor) | $45-65 | $22-30 |
| Warranty | 1-2 years (dealer) | 2 years (direct) |
The pre-programmed BL-ST-057 arrives ready to install – no cloning or programming tool needed for most RAETON models from 2019 onward. It auto-learns after a short drive.
Fitment & Compatibility
This sensor directly replaces the original units on:
- RAETON (all models with factory Baolong TPMS)
- Avatr, Changan, Deepal, Mazda (shared platform vehicles)
- Nevo and other Changan-group models using OE# 3601010CD01 or 3601010DG01
If your RAETON was built between 2018-2024 and uses clamp-in metal valve stem sensors, this is your drop-in replacement.
Installation Note
Installation is identical to OEM: mount the sensor, torque the valve nut to 4-5 Nm (check your manual), and drive above 20 mph for auto-relearn. No TPMS tool required for most models. If your vehicle doesn’t auto-learn after 15 minutes, a standard TPMS trigger tool will force the process.
Recommended Part
For a direct, cost-effective replacement, use the BL-ST-057 | BH-Sens 433MHz TPMS Tire Pressure Sensor | Fits Avatr, Changan, Deepal, Mazda, Nevo & 1 More | OE# 3601010CD01, 3601010DG01, 3601010MK02. It’s the same Baolong internals as the factory sensor, pre-programmed for your RAETON.
FAQ
Will the BH-Sens BL-ST-057 work on my 2021 RAETON?
Yes, if your vehicle uses clamp-in 433MHz sensors with OE numbers 3601010CD01 or 3601010DG01. Check your existing sensor’s part number – if it matches, this is a direct swap.
Do I need a TPMS tool to install this sensor?
No. The sensor is pre-programmed. After installation, drive above 20 mph for 5-10 minutes. The vehicle will auto-learn the new sensor ID. Only if auto-learning fails would you need a trigger tool.
How does the warranty compare to OEM?
BH-Sens offers a 2-year warranty versus the typical 1-year dealer warranty on OEM sensors. Since the hardware is identical, the aftermarket warranty is actually better.
Can I mix OEM and BH-Sens sensors on the same vehicle?
Yes. The BH-Sens BL-ST-057 uses the same protocol and frequency as the OEM Baolong sensors. The TPMS module reads all four sensors independently – mixing is fine as long as all sensors are 433MHz.