Quick AnswerThe BH-Sens BL-ST-039 433MHz TPMS sensor (OE# E300019160, E300020260, H56A7920001AC) is pre-programmed for Eπ vehicles, but fitment depends on your specific model year and…
Quick AnswerInstalling a TPMS sensor on a C-ELYSEE requires precise torque (usually 35-40 Nm for the sensor-to-valve nut and 4-6 Nm for the valve core),…
Quick AnswerWhen installing a Citroen TPMS sensor like the BL-ST-079 (433MHz), use a torque wrench set to 35–45 Nm (26–33 lb-ft) for the clamp-in nut—never…
Quick AnswerFor ROYALE vehicles, the correct TPMS sensor must match the 433MHz frequency and use a clamp-in, pre-programmed design compatible with the brand’s proprietary protocols.…
Quick AnswerPASSION vehicles require a TPMS relearn after sensor replacement or tire rotation. The most common methods are auto relearn (drive above 25 mph for…
Quick AnswerThe RCZ (Peugeot RCZ) uses the same TPMS sensor system as many Peugeot, Citroën, and DS models from the early 2010s. The BL-ST-079 BH-Sens…
Quick AnswerThe BH-Sens BL-ST-039 433MHz TPMS sensor is designed specifically for 圆梦 vehicles and their sub-brands (Aeolus, Eπ, Mhero, Nammi, Voyah). To verify fitment before…
Quick AnswerAfter replacing TPMS sensors on a T-Cross, you must perform a relearn procedure to sync the new sensor IDs with the vehicle’s ECU. The…
Quick AnswerInstalling a TPMS sensor on an Aeolus requires precise torque (typically 3-5 Nm for the valve nut, but check your vehicle manual) and correct…
Quick AnswerThe BH-Sens BL-ST-063 is a pre-programmed 433MHz clamp-in TPMS sensor designed for specific PASSION sub-brands including Aeolus, Eπ, Mhero, Nammi, and Voyah. It replaces…
