Quick AnswerFor EADO PLUS, the BH-Sens BL-ST-042 is a 433MHz clamp-in, pre-programmed TPMS sensor that should be verified against OE references 3601010BK01, 3601010MK01, or 3601010MK51…
Quick AnswerThe BH-Sens BL-ST-030 is a 433MHz clamp-in, pre-programmed TPMS sensor built for EADO DT and eight other Changan applications running OE numbers 3601010M01AA or…
Quick AnswerFor a Changan EADO XT, you need a 433MHz clamp-in sensor that matches the original OE numbers 3601010M01AA or 3601010M03. Check whether your car…
Quick AnswerThe BH-Sens BL-ST-042 433MHz TPMS sensor (OE# 3601010BK01/3601010MK01/3601010MK51) directly replaces the factory tire pressure sensors on Changan EADO ET models from approximately 2015 to…
Quick AnswerFor an EADO PHEV, you need a 433MHz clamp-in TPMS sensor that matches OE numbers 3601010CD01, 3601010DG01, or 3601010MK02. Before ordering, confirm your vehicle’s…
Quick AnswerWhen swapping to winter tires on your EADO PLUS, handle the TPMS sensors carefully to avoid damage—use the correct clamp-in torque (check your manual)…
Quick AnswerThe EADO ET requires a TPMS relearn procedure after sensor replacement or tire rotation. You can use either the automatic relearn method (drive above…
Quick AnswerThe BL-ST-050 (BH-Sens 433MHz) TPMS sensor fits select Geelygalaxy, Lynk&Co, and Zeekr models, but not the EADO ET directly. To verify fitment for your…
Quick AnswerThe EADO ET uses a direct TPMS system that requires a relearn procedure after sensor replacement or tire rotation. You can use the auto…
Quick AnswerInstalling a TPMS sensor on an EADO XT requires a precise torque of 4.0–6.0 Nm (35–53 in-lbs) on the valve stem nut, a new…
