Quick AnswerAfter replacing TPMS sensors on a LAND CRUISER (2008–2021 models), you must perform a relearn procedure to sync sensor IDs with the ECU. The…
Quick AnswerFor a T-CROSS TPMS sensor installation, use a torque wrench set to 35–40 N·m (25–30 lb-ft) for the clamp-in nut, and always replace the…
Quick AnswerThe EADO PHEV uses a 433MHz TPMS sensor system (not 315MHz), with sensors typically transmitting at intervals of 30–60 seconds when the vehicle is…
Quick AnswerThe TPMS warning light in your COUNTRYMAN typically indicates one of three issues: a dead sensor battery (common after 5-7 years), a sensor malfunction…
Quick AnswerWhen swapping to winter tires on your Fengon, always check that the TPMS sensors are compatible with the new wheels and pre-programmed to your…
Quick AnswerMazda vehicles require a TPMS relearn whenever sensors are replaced or rotated. You can use an auto relearn (drive above 25 mph for 10-15…
Quick AnswerThe BH-Sens BL-ST-041 433MHz TPMS sensor fits RAETON PLUS models from 2022 onward, sharing the same OE# 3601010CD01 platform used by Changan, Deepal, and…
Quick AnswerThe UNI-V uses a direct TPMS system that requires a relearn procedure after sensor replacement or tire rotation. You can perform an auto relearn…
Quick AnswerThe BL-ST-089 BH-Sens 433MHz TPMS sensor is a pre-programmed, clamp-in sensor that fits specific VARIO models along with Avatr, Changan, Deepal, Mazda, and Nevo…
Quick AnswerTo relearn TPMS sensors on a 智道 vehicle after replacing a sensor, you can use an OBD tool (recommended), perform a stationary relearn via…
