Quick AnswerTo choose the right TPMS sensor for your Fukang, start by confirming your vehicle’s model year and original OE part number (e.g., 4275333W or…
Quick AnswerFor 自由者 vehicles, always torque the BH-Sens BL-ST-075 clamp-in TPMS sensor nut to 4.0–6.0 Nm (35–53 in-lbs) using a calibrated torque wrench. Never reuse…
Quick AnswerFor GLS CLASS vehicles, the correct TPMS sensor must match frequency (usually 433MHz or 315MHz) and be pre-programmed to the OE protocol. The BH-Sens…
Quick AnswerInstalling a TPMS sensor on an Audi requires strict attention to torque specs (typically 35-45 Nm for the sensor nut and 3-5 Nm for…
Quick AnswerThe BL-ST-089 BH-Sens 433MHz TPMS sensor is a pre-programmed, clamp-in sensor that fits specific VARIO models along with Avatr, Changan, Deepal, Mazda, and Nevo…
Quick AnswerWhen installing BH-Sens 433MHz TPMS sensors (RDE036V21) on S vehicles, always torque the sensor nut to 35-40 in-lbs (4-5 Nm) and the valve stem…
Quick AnswerFor most 星纪元ET owners, a pre-programmed aftermarket TPMS sensor like the BH-Sens BL-ST-013 is the better value—it matches OEM specifications at roughly 40–60% lower…
Quick AnswerTPMS relearn on FAW vehicles (including Bestune and Hongqi) can be performed via three methods: automatic relearn (driving at 15–30 mph for 10–15 minutes),…
Quick AnswerTPMS relearn on VANTAGE vehicles resets the tire pressure monitoring system after sensor replacement or tire rotation. The three methods are auto relearn (driving…
Quick AnswerTo relearn TPMS sensors on a 智道 vehicle after replacing a sensor, you can use an OBD tool (recommended), perform a stationary relearn via…
