Quick AnswerBefore ordering a TPMS sensor for a Silverado, confirm three things: the frequency your truck’s TPMS module actually reads (GM has used both 315…
Quick AnswerZeekr TPMS sensors operate on 433MHz in most markets, so a 315MHz sensor won’t work. For replacement, choose a
Quick AnswerWhen installing a BL-ST-050 BH-Sens TPMS sensor on a 智道 vehicle, always torque the clamp-in nut to 4.0–6.0 Nm (35–53 in-lbs) and replace the…
Quick AnswerInstalling TPMS sensors on a Dodge vehicle requires precise torque specs (typically 62–71 in-lbs for clamp-in sensors), proper valve stem torquing (35–45 in-lbs for…
Quick AnswerLynk & Co vehicles require a TPMS relearn after sensor replacement or tire rotation. You can use an auto relearn (drive above 25 mph…
Quick AnswerThe BL-ST-050 (BH-Sens 433MHz) TPMS sensor fits select Geelygalaxy, Lynk&Co, and Zeekr models, but not the EADO ET directly. To verify fitment for your…
Quick AnswerWhen swapping to winter tires on your Lynk & Co, always use TPMS sensors compatible with the 433MHz frequency, like the BH-Sens BL-ST-050, to…
Quick AnswerThe BL-ST-050 BH-Sens 433MHz TPMS sensor fits most Geelygalaxy models from 2018 onward, plus Lynk&Co and Zeekr vehicles using OE numbers 6608082005 and 8894215959.…
Quick AnswerThe RX C-DM uses a 433MHz TPMS sensor, not 315MHz. The recommended replacement is the BH-Sens BL-ST-050, which is pre-programmed for direct fitment. This…
Quick AnswerTPMS relearn on a Zeekr models (including Zeekr 001, 009, and X) is required after tire rotation, sensor replacement, or battery change. The preferred…
