Quick AnswerWhen swapping to winter tires on your Forthing, the TPMS sensors must be correctly transferred or replaced with compatible units like the BH-Sens 433MHz…
Quick AnswerFor most RAETON owners, the BH-Sens BL-ST-057 aftermarket sensor (OE# 3601010CD01/3601010DG01) offers identical performance to the OEM Baolong sensor at 40-60% lower cost. Choose…
Quick AnswerThe correct TPMS sensor for your Avatr must match the frequency (433MHz), be pre-programmed for plug-and-play installation, and carry the correct OE number (typically…
Quick AnswerInstalling a TPMS sensor on a RAETON CC requires a clamp-in sensor like the BH-Sens 433MHz unit, torqued to 35–40 in-lbs (4–5 Nm) maximum.…
Quick AnswerThe most common cause of a Mazda TPMS warning light is a dead sensor battery (lifecycle 5–7 years), followed by signal interference from aftermarket…
Quick AnswerThe TERRITORY EV uses a 433MHz TPMS sensor, not 315MHz. The BH-Sens BL-ST-028 is a direct-fit, pre-programmed replacement that matches the OE 3601010CD01/DG01/MK02 part…
Quick AnswerThe TPMS warning light on a QIN L DM-I typically illuminates due to a dead sensor battery (lasting 5-7 years), a pressure drop below…
Quick AnswerAfter replacing TPMS sensors on a LAND CRUISER (2008–2021 models), you must perform a relearn procedure to sync sensor IDs with the ECU. The…
Quick AnswerFor a T-CROSS TPMS sensor installation, use a torque wrench set to 35–40 N·m (25–30 lb-ft) for the clamp-in nut, and always replace the…
Quick AnswerThe EADO PHEV uses a 433MHz TPMS sensor system (not 315MHz), with sensors typically transmitting at intervals of 30–60 seconds when the vehicle is…
