Quick AnswerThe TPMS warning light on your ENCLAVE can be triggered by a low or dead sensor battery, a damaged sensor, or radio frequency interference…
Quick AnswerWhen swapping to winter tires on your CTS, your existing TPMS sensors (like the BH-Sens BL-ST-059 at 433MHz) need to be either reinstalled in…
Quick AnswerThe BH-Sens BL-ST-087 (OE# 26670584) is a pre-programmed 433MHz clamp-in TPMS sensor designed for specific Buick and Chevrolet models, not directly for GWM vehicles.…
Quick AnswerThe Cadillac LYRIQ uses a 433MHz TPMS system that requires a relearn procedure after sensor replacement or tire rotation. You can use either an…
Quick AnswerOn a CRUZE, a persistent TPMS warning light usually means one of two things: the tire pressure sensor’s internal battery has died (common at…
Quick AnswerInstalling a BH-Sens BL-ST-072 TPMS sensor on your ENCORE requires precise torque specs—typically 35–40 in-lbs for the sensor nut and 62–74 in-lbs for the…
Quick AnswerFor the UNI-V IDD, you need a 315MHz TPMS sensor compatible with GM/Chrysler-based systems. The BH-Sens BL-ST-072 (OE# 12768826, 13516164, 13540604) is a direct-fit…
Quick AnswerTo complete a TPMS relearn on a REGAL GS after sensor replacement or rotation, you can use the auto relearn method (drive above 20…
Quick AnswerWhen installing a replacement TPMS sensor on a Roewe vehicle, always torque the sensor retaining nut to 4-6 Nm (35-53 in-lbs) and the valve…
Quick AnswerNammi vehicles use a 433MHz TPMS system compatible with BH-Sens pre-programmed sensors like the BL-ST-097. To verify fitment, check your Nammi model’s year (typically…
